HOME >> New Products

New Products

New FLOM Products for LC

FLOM, as a developer, manufacturer, and seller of HPLC and UHPLC components, is continually developing new products for our market. Besides offering our full line of regular products based on our long experience in this market, we also stand ready to help with requests for specialized designs.

  • Dual Pump KP-22D
  • Cascade Pump  CP-14
  • Gradient Controller  GE-11
  • Auto Valve  VF-01,02 Series
  • Tri-Fitt Series

DOWNLOAD CATALOGS

Dual Pump KP-22D

Dual Pump KP-22D

Features
  • High precision and stable flow volumes
  • Equipped with pulse control for reduced fluctuations in pressure
  • Easy to read backlighted LCD display
  • Real-time display of pressure
  • Column integrity protected by convenient upper-limit pressure switch
  • Metered flow mode allows setting to desired flow volumes
  • RS-232C interface for computer control
  • Fluorocarbon polymer used throughout the wetted path
  • Can choose from 3 different models to match desired flow ranges
  • Compact design similar to the SP and KP Series
Spec Sheet
Product Name All-Fluorocarbon Polymer Dual Pump
Part Number KP-22-13D KP-22-33D
Max pressure *1 2MPa 1MPa
Flow rate range*2 0.01~10.00mL/min 0.1~50.0mL/min
Flow per stroke 32μl 154μl
Flow accuracy ±0.3%
Features Self-regulating function  ・ Flow correction ・ Pressure loss correction ・ Constant Pressure Flow*3 ・ Set Volume Dispensing
Pressure accuracy ±5%
Wetted material Inert:Sapphire・Ruby・PTFE・ECTFE・ETFE
Control Panel Input: PUMP ON/OFF ・ Output: Error signal
Communication RS232C
Dimensions(mm) 144(H) x 79(W) x 285(D) excluding protuberances
Weight approx 3.8kg
Order Code SDP-P1114 SDP-P1111
  • *1 Max pressure (MPa) here means transient maximum pressure; it does NOT mean regular maximum pressure at the maximum flow rate.
  • *2 Long term pumping is not possible if flow rate is set to maximum
  • *3 The pressure value displayed when using the constant pressure mode is the average of all measured values. Pulse mode cannot be used with the constant pressure mode.
  • For custom designs not listed above contact us directly.
  • Product specifications and appearance may be altered without prior notice.

Cascade Pump

Cascade Pump

Features
  • High precision and stable flow volumes
  • Equipped with pulse control for reduced fluctuations in pressure
  • Easy to read backlighted LCD display
  • Real-time display of pressure
  • Column integrity protected by convenient upper-limit pressure switch
  • Metered flow mode allows setting to desired flow volumes
  • RS-232C interface for computer control
  • Cascade configuration (linear pumping) drastically reduces air bubble problems
  • Can use self-cleaning function
  • Space-saving compact design
Spec Sheet
Product Name Cascade Pump
Part Number CP-14-13
Max pressure *1 25MPa/20MPa
Flow rate range*2 0.01~10.00mL/min
Flow per stroke 69μl
Flow accuracy ±0.3%
Features Self-regulating function*3  ・ Flow correction ・ Pressure loss correction ・ Constant Pressure Setting*4 ・ Set Volume Dispensing
Pressure accuracy ±5%
Wetted material Inert:PEEK・Sapphire・Ruby・PTFE・PCTFE
Control Panel Input: PUMP ON/OFF ・ Output: Error signal
Communication RS232C
Dimensions(mm) 115(H) x 140(W) x 190(D) excluding protuberances
Weight PEEK: approx 3.8kg
Order Code SCP-P4001
  • *1 Max pressure (MPa) here means transient maximum pressure; it does NOT mean regular maximum pressure at the maximum flow rate.
  • *2 Long term pumping is not possible if flow rate is set to maximum
  • *3 Pulse control operation only possible at pressures of 10 MPa or lower.
  • *4 The pressure value displayed when using the constant pressure mode is the average of all measured values. Pulse mode cannot be used with the constant pressure mode.
  • For custom designs not listed above contact us directly.
  • Product specifications and appearance may be altered without prior notice.

Gradient Controller

Gradient Controller

Features
  • Easy to program gradient control
  • Space-saving compact design
  • Connects to all FLOM pumps
  • Timer function for automatic valve control
  • Comes with RS-232C communications protocol to control FLOM pumps
  • Comes in 2 gradient modes, either linear or step
Spec Sheet
Product Name Gradient Controller
Part Number GE-11
Max Program Files 99
Input Signals PUMP START  GRADIENT START
Output Signals Valve Change  ERROR
Connectable FLOM Pump Series HI-12-33  HP-12-33  AI series
KP series  SP series  CP-14 
Dimensions(mm) 70(H) x 140(W) x 200(D) excluding protuberances
Weight approx 0.5kg
Rated Power Source AC100V
Order Code SGC-B201
  • For custom designs not listed above contact us directly.
  • Product specifications and appearance may be altered without prior notice.
Typical Gradient Controller and Pump Configuration

Typical Gradient Controller and Pump Configuration

Sample Gradient Control Program

Sample Gradient Control Program

High Speed Auto Valve VF-01/VF-02 Series for OEM Systems

High Pressure, Long Life, Fast Switching

Features

  • Space-saving super compact design
  • VF-01-1050 model has vertical port for easy attachment to auto sampler
  • Reduces pressure shock through high revolving speed (60 revolutions/ 0.1 sec)
  • The ceramic type seal improves seal life to 100,000 cycles
  • Can switch in valvehead rated to 100MPa for super high speed analytical applications
  • Detachable valvehead permits fast, efficient maintenance

Outer Dimension (VF-01)

Outer Dimensions

Outer Dimensions (VF-02)

h5>Outer  Dimensions  (VF-02)

Spec Sheet

Product name Auto Valve
Part Number VF-01VF-02
Automatic Control Direct drive by stepper motor
Manual Control -
Remote input/output Level Logic: Position change (2-position switching only)
Pulse Logic Input 2-position change, rotary port selection, home position reset, CPU reset
Pulse Logic Output Port position, error
Voltage Range DC24V
Weight approx 0.7kg
  • Product specifications and appearance may be altered without prior notice.
  • Due to continual poduct improvement, products may differ slightly from images displayed in user manuals and catalogs.
  • For designs not shown here, contact us directly for more information.
  • Durability data is based on tests performed at our factory.
Part Number VF-01-1002 VF-01-1005 VF-01-1103 VF-01-1104 VF-01-1003 VF-01-1036
Application port analytical 6 port analytical 6 port analytical 6 port analytical port analytical Micro 6 port analytical
Spec High Pressure SUS Inert High Resistance Ceramic,High Pressure SUS High Resistance Ceramic,High Pressure Inert High Pressure Inert low dead volume, High Pressure SUS
Path Position 6 port analytical
6 port analytical
Max Pressure 40MPa (5800psi) 20MPa (2900psi) 40MPa (5800psi) 40MPa (5800psi) 40MPa (5800psi) 40MPa (5800psi)
Wetted Material SUS, PEEK PEEK SUS, Ceramic, PEEK PEEK
(SUS outer envelope) ,
Ceramic
PEEK
(SUS outer envelope)
SUS, PEEK
Tube OD 1/16" 1/16" 1/16" 1/16" 1/16" 1/16"
Path Diameter 0.4mm (0.016") 0.4mm (0.016") 0.4mm (0.016") 0.4mm (0.016") 0.4mm (0.016") 0.25mm (0.01")
Part Number VF-01-1037 VF-01-1056 VF-01-1010 VF-01-1012 VF-01-1013 VF-01-1015
Application 6 port micro analytical 6 port micro analytical analytical analytical 4 port analytical 4 port analytical
Spec Low dead volume,High Pressure Inert Low dead volume,Inert High Pressure SUS Inert High Pressure SUS Inert
Path Position 6 port analytical
6 port analytical
dual 3 port 2 way
Dual 3 port 2 ways
4方切換
4port analytical
Max Pressure 40MPa (5800psi) 20MPa (2900psi) 40MPa (5800psi) 20MPa (2900psi) 40MPa (5800psi) 20MPa (2900psi)
Wetted Material PEEK
(SUS outer envelope)
PEEK SUS, PEEK PEEK SUS, PEEK PEEK
Tube OD 1/16" 1/16" 1/16" 1/16" 1/16" 1/16"
Path Diameter 0.25mm (0.01") 0.25mm (0.01") 0.4mm (0.016") 0.4mm (0.016") 0.4mm (0.016") 0.4mm (0.016")
Part Number VF-01-1040 VF-01-1058 VF-01-1050 VF-01-1065
Application 8 port micro-analytical 8 port micro-analytical 6 port analytical 6 port analytical
Spec Low dead volume,High Pressure SUS Low dead volume,High Pressure Inert Vertical Port Injection,High Pressure SUS Vertical Port Injection, Inert
Path Position 8 port 2 position
8 port 2 position
6 port analytical
6 port analytical
Max Pressure 40MPa (5800psi) 20MPa (2900psi) 40MPa (5800psi) 20MPa (2900psi)
Wetted Material SUS, PEEK PEEK SUS, PEEK PEEK
Tube OD 1/16" 1/16" 1/16" 1/16"
Path Diameter 0.25mm (0.01") 0.25mm (0.01") 0.4mm (0.016") 0.4mm (0.016")
  • Product specifications and appearance may be altered without prior notice.
  • Due to continual poduct improvement, products may differ slightly from images displayed in user manuals and catalogs.
  • For designs not shown here, contact us directly for more information.

Tri-Fitt Series (No.10-32UNF, OD 1/16" Tubing)

Tri-Fitt Series (No.10-32UNF, OD 1/16 Tubing)

Features
  • handles pressures of 100MPa and above
  • reduces tube twisting
  • long-life fitting - simply replace PEEK ferrule as needed
Tri-Fitt Series (No.10-32UNF, OD 1/16 Tubing) Tri-Fitt Series (No.10-32UNF, OD 1/16 Tubing) Tri-Fitt Series (No.10-32UNF, OD 1/16 Tubing)
Product  Name Tri-Fitt ing Product  Name Replaceable  Ferrule Product  Name Replaceable  Ferrule
Part  Number 9612 Part  Number 9605 Part  Number 9606
Material SUS316 Material SUS316 Material PEEK
Total 10 Total 10 Total 10
See for yourself why FLOM is a frontrunner in LC components.
Why choose FLOM?

Contact FLOM Here